Tata Motor’s Independent production hubs

PUNE \ MUMBAI: After Nano, it is instance for the most original field at Tata Motors. The country’s maximal container manufacturer, which has resulted in the machine concern terminal hebdomad with its small pricey automobile ever, is currently preparing to organise its manufacturing dealings crossways assorted platforms, a country feat from the ingrained help of manufacturing the 75-year-old company.
The Mumbai-based pushcart and automobile concern plans to fortuity with autarkical creation hubs, which module pore on the concoct of assorted vehicles at assorted locations, instead of the older works where he desegrated advertizement vehicles and instrumentation vehicles Passenger creation lines in the aforementioned unit.
It adheres to the belief that Tata Motors plans to advise his Ace in Pune organisation in Uttarakhand Rudrapur patch newborn generations of vehicles, including SUVs (sports programme vehicles), would be prefabricated in Pune. The advise module liberated up more than 5 hectares in Pune that module be utilised to process the creation of Sumo, Safari and Indica, sources said.
However, a spokesman for Tata Motors, when contacted, said the consort module take a pliant advise to every its units patch concentrating on destined categories of products in factories. The organisation of Dharwad in state makes buses patch metropolis artefact is utilised for trucks and buses.
The company’s oldest organisation in Jamshedpur is for onerous trucks patch the newborn positioning of Rudrapur and Magic makes Ace, the sub-tonne reddened advertizement vehicles. The Pune organisation makes cars and traveller vehicles. While Tata Motors had originally designed deployment of the Nano Singur, the organisation is reportedly existence reworked to Pantnagar in Uttarakhand. Tata Motors has designed a power of 2.25 lakh units for Ace, the sub-one tonne truck, patch the underway power of Pune is around 60000 units per year.
   The advise to create poles of autarkical creation for apiece creation is primarily economies of scale, skills and expertise, and support the fast treatment of every businesses low digit roof. Such a manoeuvre would also streamline Tata Motors quality, reliability and wage the adaptation of skills and skillfulness because of his status in advertizement vehicles, programme vehicles and cars, said sources.
According to analysts, whatever manufacturing hubs to provide panoramic ordinary benefits generalized and also support in the treatment of creation lines. "Although the bourgeois humble crapper be rationalized with much a model, he also held logistics costs low control," said Ashutosh Goel of Edelweiss Securities. Incidentally, modify prices and modify edge products much as As the Nano and are prefabricated from Singur, Rudrapur and Pantnagar, because these places gives set advantages.
The creation of autarkical poles has been in the scuttlebutt for whatever instance but was suspended because of organization issues. Tata Motors has fresh benched whatever employees at its Pune organisation after it definite to turn creation because of the modify in sales. Rising rates hit unnatural some grouping to defer their purchases. According to a past inform from Mumbai-based Enam Securities, job and portion onerous advertizement vehicles module move to attestator medium ontogeny "due to the process in disposition rates and dripless availability of financing. We countenance H2 FY08 to run a meliorate ontogeny compared to the 1st half of FY08. "

This entry was posted on Wednesday, January 16th, 2008 at 2:16 am and is filed under News. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

104 Responses to “Tata Motor’s Independent production hubs”

tata motors lucknow March 26th, 2008 at 5:09 pm

[...] vehicle manufacturing company. OICA ranked it as the world’s 21st largesttatananocars.blogspot.comTATA MOTOR??S INDEPENDENT PRODUCTION HUBS PUNE MUMBAI: After Nano, it is time for a most innovative engineering during Tata Motors. A [...]

neeraj kumar May 18th, 2008 at 12:01 am

I am mechanical engr. graduate.I am looking for a job in your company.
Thanks and Regard
Neeraj kumar
09410925474

sandeep singh banai June 22nd, 2008 at 4:11 am

I am an automobile engineer,and i am eager to do the job in your company.my automobile record is up to the mark.
thanking you,
tel no; 09993474226

Gaurav Pokhriyal June 23rd, 2008 at 5:06 am

I am a mechanical engineer having 1 year experience in Automobile sector.Presently I am located at pant nagar
Thank you

RAHUL SAXENA June 25th, 2008 at 4:34 pm

I HAVE COMPLETED MBA IN THIS YEAR(2008),IF ANY VACANCY IS THERE IN UR COMPANY,PLSE CONTACT ME AT 09259416307
THANK U…..

vikash kumar June 27th, 2008 at 9:42 am

I AM AN AUTOMOBILE ENGINEER. I WAS COMPLETED MY DIPLOMA IN AUTOMOBILE LAST 2004. AFTER THEN WORKING WITH -MAHINDRA & MAHINDRA, TOYOTA, TATA, & FORD DEALER. I AM EAGER TO JOIN U.
9935108144

vikash kumar June 27th, 2008 at 9:47 am

I AM AN AUTOMOBILE ENGINEER. I WAS COMPLETED MY DIPLOMA IN AUTOMOBILE LAST 2004. AFTER THEN WORKING WITH -MAHINDRA & MAHINDRA, TOYOTA, TATA, & FORD DEALER.
CELL NO- 09935108144

shiv kumar June 27th, 2008 at 11:10 am

iam a mechanical engg. i have comleted my diploma in mechnical pass out in 2006, after that working with tata motors in mentenance in rudrapur.

ARVIND PRAKASH VERMA June 27th, 2008 at 11:40 am

I am a Diploma in Mechanical Engineer & Post Diploma in Industrial Safety passed out in1985 & 1994.I am intrested to shift at Rudrapur area. presently working as Assistant Manager- Safety(P&A) in Cement manufacturing Company Certified by ISO9001,ISO14001,OSHSAS18001.

ARVIND PRAKASH VERMA June 27th, 2008 at 11:47 am

I am a Diploma in Mechanical Engineer & Post Diploma in Industrial Safety passed out in1985 & 1994.I am intrested to shift at Rudrapur area. presently working as Assistant Manager- Safety(P&A) in Cement manufacturing Company Certified by ISO9001,ISO14001,OSHSAS18001.
09929744400

anil kumar June 28th, 2008 at 2:40 am

i am anil kumar

anil kumar June 28th, 2008 at 2:42 am

i am anil kumar diploma in mechanial presently i am working sales & sercive engineer pump company.

Vijay July 1st, 2008 at 2:26 am

sir i am young master degree holder ih Personnel Management along with post graduate diploma in finance looking for a job in your esttemed organisation in admin department.

pradeep July 2nd, 2008 at 2:53 am

heello sir,
I am pradeep ,complited B.E. mechanical .if any jobs in your compnay please contact me 9844372440

yaligar July 2nd, 2008 at 3:01 am

heello sir,
I am pradeep ,complited B.E. mechanical .if any jobs in your compnay please contact me 9844372440

SANJOY ROUTH July 5th, 2008 at 5:06 am

I AM AN AUTOMOBILE ENGINEER. I WAS COMPLETED MY DIPLOMA IN AUTOMOBILE LAST 2006. AFTER THEN WORKING WITH – TATA, DEALER. THEN I AM WORKING IN A COMPANY AS QUALITY CONTROLER .PRESENT WORKING AS A DESINGNER. MOBILE _ 09932357301,

SANJOY ROUTH July 5th, 2008 at 5:07 am

I AM AN AUTOMOBILE ENGINEER. I WAS COMPLETED MY DIPLOMA IN AUTOMOBILE LAST 2004. AFTER THEN WORKING WITH -MAHINDRA & MAHINDRA, TOYOTA, TATA, & FORD DEALER.

AMAN SHARMA July 6th, 2008 at 12:02 pm

sir, i am an automobile engineer seeking job in your company.waiting for your reply.

Shubhranath yadav July 7th, 2008 at 4:48 am

sir,
I am a electrical engineer. i was completed b tech in electrical& electronics engg seeking job in your company.waiting for your reply.

Shubhranath yadav July 7th, 2008 at 4:53 am

sir,
i waiting for your reply.
my mo. no 09411405376

neeraj kr verma July 8th, 2008 at 8:27 am

find a job in marketing

neeraj kr verma July 8th, 2008 at 8:28 am

i have good communication skills

nilesh.u.chauhan July 11th, 2008 at 2:12 pm

hi i m nilesh i m serch new job 4my bright futher.i hav last 3 exp in auto mobil sector….

Nagesh Kumar July 12th, 2008 at 3:01 am

Dear sir,
I am a Network engineer. i was completed B.Com & Hardware & Networking Diploma From JETKING. seeking job in your company.waiting for your reply

Thanx & Regard
Nagesh Kumar
09719338458

vishal agrawal July 13th, 2008 at 8:23 am

sir i m an electronics and communication engineer 2007 passout. i have a seven month experience in automobile gravity die casting field.

vishal agrawal July 13th, 2008 at 8:30 am

i m an electronics and communication engineer 2007 passout. i have a seven month experience in gravity die casting alloy wheel manufacturing field. if u have found any job then plz contact me.

khalik July 14th, 2008 at 6:54 am

sir i am khalik working a contracting co. as a senior accountanat seeking a job in your company in rudrapur wating your repaly
thanks
regards
khalik

basavaraj July 16th, 2008 at 2:05 pm

i want to do job in your company.

hanif mohdb shiakh July 16th, 2008 at 2:07 pm

i want to work in ur organisation

charujoshi July 17th, 2008 at 8:00 am

i am mba(marketing)fresher.i want a job in your orgnitation……

sanjay kumar July 17th, 2008 at 10:46 am

trouble shooting and maintenance of cnc plc based machine

Kuldeep Bhatnagar July 18th, 2008 at 3:23 am

I am looking for a job in rudrapur,
I have B.com comleted in 2006
And also 2 year work in Arm Tech India Ltd as Billing Operater.
And i also complete 3 year diploma in computer application.

ShivShanker Gupta July 20th, 2008 at 2:04 pm

i am looking job in rudrapur,
i have completed B.tech(M.E.)in2007

Shweta Singh July 22nd, 2008 at 1:45 am

I have completed three year diploma in information technology in 2006

Girish Vikram July 22nd, 2008 at 5:52 am

I completed my B.Tech in AUTOMOBILE ENGINEERING in 2008.If any jobs match me.My no. is 09895347727

abhishek chandra July 22nd, 2008 at 10:08 am

I have done my b. tech (fresher) with 64% marks in mechanical engg. from Greater Noida inst. of Tech. Greater Noida. If you have opportunities for me then contact me at 09899286756.
and my id is me_abhishek02@yahoo.co.in

Ashish July 24th, 2008 at 4:20 am

sir,
i have pass out my degree in automobile engg from arya college of engg&it,jaipur.now i am looking for start of my carrer witgh your esteem organisation if u have any program for freahers then plz consider me.

sonu kumar July 25th, 2008 at 6:01 am

hello ,sir
i have done 3 year diploma in automobile enginearing from govt.polytechnic college sundernagar accrated by NBA and iso approved college.i nam looking for job in your company

moloy kr. banerjee July 25th, 2008 at 10:53 am

I am a diploma mechanical engg. fresher , from RAMAKRISHNA MISSION SHILPAMANDIRA BELUR MATH. i scored 72% in 10th standard and 74.4% in 12th. i also secured a average semester marks of 84.5%. i want a automobile based job in west bengal.

contact no. 919831283086

email: moloy744@yahoo.com

thank you.

manju ghugtiyal July 26th, 2008 at 8:36 am

i have done mba from amrapali institute haldwani.(uttrakhand) in 2008.
my specialisation subject was international business and marketing. seeking a job in rudrapur.my contact number is 09319772745

manju ghugtiyal July 26th, 2008 at 8:40 am

job for a fresher.done mba .specialisation sub-international business and marketing.seeking a job rudrapur

devnidhi bisht July 26th, 2008 at 12:54 pm

I have done my b. tech (fresher) with 67% marks in mechanical engg. from swami vivakanand inst.of engg.&tech from PTU.i am from uttarakhand domisile.seeking a job in rudarapur.my contect no is 9997873159,09872627852

Namrata Ugale July 29th, 2008 at 3:35 am

I have done DEGREE in ELECTRONICS from SHIVAJI UNIVERSITY,KOP.
I am FRESHER,i am looking for job in your company.If you have vacancies in pune or mumbai please tell me on 020-25396921

Mohammed Hussain T July 31st, 2008 at 3:07 am

Hi, I have completed B.Com and having 7 Years of Experience in Customer Service Industry as a Team Leader, based at HUBLI(DHARWAD), Plz let me know who i could fit in any role such as Admin, HR etc. My Contact No. 9739779181, 0836-6588160.

Imtiyaz Ahmed T July 31st, 2008 at 3:14 am

I am a Diploma in Electrical Engeeniring, presently having more than 14 yrs, of Experience and presently working with A Construction Company based at Vijaywada, looking for a opportunity to work with TATA MOTORS in Dharwad.

baidynath kumar August 1st, 2008 at 9:21 am

I am a diploma in automobile engeeniring.presently having 10yrs experince as workshop incharge in daewoo motors and mahindra & mahindara motors dealer.i want a job in your company.my ph n0 is 09973683997

BIMAL MAKHAL August 2nd, 2008 at 8:01 am

Senior service engineer , 7 years experience in high speed rotating machine (steam turbine 10 mw capacity) with acceries , ————
NON POLITICAL person ,—–Residence–SINGUR,
MOBILE NO-09433487995

ravinder kumar August 2nd, 2008 at 1:56 pm

i completed diploma in mechnical engineering in 2006 presently i am working as asst engineer in cheema boilers ltd i am interested in your company

manoj sharma August 2nd, 2008 at 2:20 pm

i have completed diploma in mechanical engineering in 2008 and at present i am working as diploma engineer traniee in bengal energy ltd in kharagpore.i am interested to work in your company.i have secured 67.7% and 61.9 in madhyamik and higher secondary respectively and still waiting for 6th semester result of DME.looking forward to your responce

Anup kumar sharma August 3rd, 2008 at 2:47 am

I am diploma in mechanical engineer,do work in aurangabad moters mfg ltd. aurangabad in a gravity die casting dept. i looking a good opportunity to work in tata moters

arun kumar singh August 6th, 2008 at 5:05 am

i m b.tech in electrical engg from g.b.pant university,pantnagar. i want job in your company.

Mainak Datta August 6th, 2008 at 2:48 pm

I am an B Tech (automobile Engg) -2007 batch from Kolkata, AICTE recognised, want job in your company preferably in W Bengal.
Contact 09239265205 or 09238338111

Naved Nisar Ahmad August 6th, 2008 at 3:08 pm

I am B.Tech mechanical Engineer batch-2008 & i have great interest in Design, R&D & Manufacturing of mechanical engg. So please consider my application for the same.

Regards
Naved Nisar Ahmad
09452040237; 09415726260

Sanjay Kandpal August 10th, 2008 at 4:28 am

CURRICULUM VITAE

E-mail : jagdishkandpal@yahoo.com Address : KHANNA FARM (TEENPANI),
:e_haider9@indiatimes.com BAREILLY ROAD, HALDWANI
P.O – INDUSTRIAL ESTATE,
Name : SANAJAY KANDPAL DISTT. – NAINITAL (UTTRAKHAND)
MOB. NO. : 9758812949 Pin code : 263139 (Haldwani)

Carrier Objective:

I wish to work in an organization that would give me adequate exposure and experience to grow and excel in my career as well as to make a positive contribution towards the objective of the organization. Intend to build a career with committed & dedicated people, which will help me to explore myself fully and realize my potential.

Education:

S.No Name of Exam School/University Year

1. High School U.P.Board 1997

2. Intermediate U.P.Board 2000

3. Graduation Kumaon University 2003

4. M.Com Privies Yr. Kumaon University 2004

Professional Qualification:

1. One year Computer Basic Course. (Ms-Office, Html, Internet, basic Language C & C++)
2. Tally 9, 7.2, 6.3, 5.4 Busy, ERP & other personal Software work experience.
3. Computer Typing speed, English: 50wpm & Hindi: 30wpm

Working Experience:

From 28 March to Till Date

Working with “Windals Auto (P) Ltd” Plot 24/A Sector No. 11, IIE , Pantnagar Ind, Estate,Rudrapur, as an Assistant Account Manager , the Co. manufacturing Unit in Uttrakhand made a Tata Exle Parts (Banjo Beam).

From May 06 to March 08

Working with “Kumaon Georesource Pvt. Ltd., Haldwani” 179, Gurunanakpur Nainital Raod, Haldwani as a Ex. Accountant

From Jan 03 to April 06

Worked with C.A. C.P.Dasila and performed Accounting work in the under mentioned Companies/Firms: -

Nagpal Bajaj, Haldwani, Authorize Dealer’s Bajaj Auto Ltd.
B.K. Distributor, Haldwani Authorize Dealer’s Eicher Motor Ltd.,
Amit Automobile, Haldwani, Authorize Dealer’s Swaraj Mazda Ltd.

K.K. Automobile, Haldwani
Archana Traders, Haldwani

Over Five year of experience in Finance & Accounts, Auditing & Taxation, Bank Reconciliation, TDS, TCS, VAT, Vat Compositions Return, Service Tax, Central Sales Tax, Fringe Benefit Tax & Basic Excise Knowledge. Overseeing accounting functions right upto the finalization of year-end statements such as Balance Sheet, Profit & Loss Accounts.

Salary drawn: Rs. 8,000/- CTC

Expected Salary – Negotiable

PERSONAL PROFILE:

Name : Mr. Sanjay Kandpal
Father’s Name : Mr. K.R. Kandpal
Date of Birth : 18th Jan 1981
Postal Address : Mr. Sanjay Kandpal
S/o K.R. Kandpal,
Khanna Farm (Teenpani),
Bareilly Road, Haldwani,
P.O. – Industrial Estate,
Distt. Nainital, ( Uttaranchal )

Mob. No. : 9758812949
Phone NO. : 05946 245053 ( R )

Sex : Male
Marital Status : Unmarried
Nationality : Indian
Hobbies : Sports, Traveling, Reading, Listening Music & Meeting New People.

Positives:

I’m Committed, Communicative, Enthusiastic and Confident of My Ability to Work in A Team. My Hard Working Nature and Ability to Work under Pressure Makes Me Strong.

Declaration:

I hereby declare that the information furnished above is true to the best of my knowledge.

DATE : ______/______/________
PLACE:______________________
SIGN. OF CANDIDATE
(SANJAY KANDPAL)

Sharath shetty August 12th, 2008 at 11:29 am

hai, i have completed diploma in automobile engineering in 2007 and at present i am working in Karnataka agencies it is an authorised service center of mahindra 4wheeler vehicles as an sevice adviser.i am interested to work in your company.i have secured 72% overal.looking forward to your responce

achintya chakraborty August 12th, 2008 at 11:35 am

i am diploma engineer in automobile& also iam gratuate in B.SE. automobile is my passion. i do work in pashankar auto wheel pvt.ltd, i am very craze about tata motors. pls u reply me,i am facing lot of problem so pls contact me on this no-9730251682

Jayson John Joseph August 14th, 2008 at 8:27 am

Jayson John Joseph
Giridhar Nagar
B-1 Flat No: 3
Warje Malwadi
Pune-411058

Contact: 09970626848
E-mail: jaysonjjoseph@gmail.com

Subject: Application for Trainee Engineer in your organization

Respected Sir/Madam,

I am ‘Jayson John Joseph’ completed my B.Tech Degree in Mechanical
Engineering from Pondicherry University.

During my career I was Co-operative, Punctual, Sincere, & my Willingness to learn new things helps me to establish my knowledge.

I will be grateful if I get a chance to work in your esteemed organization which will help me to gain vast industrial knowledge.

Thanking you

Jayson John Joseph
Note: Please find enclosed resume for further details.

deepak kumar August 15th, 2008 at 11:02 am

hello sir/madam,
im 2009 passing out engineer in electrical & electronics engg & i really want to work with ur company.
so plz rply me if any vacancy is thr for me.
mail me at: deepak.ietb@yahoo.co.in
mob no:09463494984

Atiq August 16th, 2008 at 3:50 am

i am Atikur rahman, looking for a job in your company.
thanks.
09911509144

khalik August 18th, 2008 at 6:59 am

RESUME

Khalik
St. John’s Parsonage
Mallital Nainital
Uttrakhand INDIA
Contact No. India +91-9411328808
Contact No. Dubai +971-55-8478976
E.Mail: Khaliquen@yahoo.co.in
E.Mail: khalik@hotmail.com

OBJECTIVE:-

To strive for excellence by working and contributing in a professional organization this will Leverage my academic background as well as my exposure in Finance, Account, & Auditing

Academic Qualifications:-

Passed MASTER of COMMERCE in 1993 from Kumaun University, Uttrakhand,INDIA
Passed BACHELOR of COMMERCE in 1991 from Kumaun University Uttrakhand INDIA
Technical Qualifications:-

Diploma in Computer APTECH COUMPTER Nainital Uttrakhand, India
Computer Packages Known: Windows XP, MS Word, MS Excel, Power
Point, & Billing Software, Knowledge of Email & Internet Related facilities.
Accounting Package known – Peachtree, and Latest Version of Tally

Training:-

Ministry of Industry Government of India (Small Industry Development Organization Kanpur India)

Working Experience:-

Presently Working:-

Working with M/s. ACICO INTL.CONTR.CO. L.L.C in DUBAI United Arab Emirates (Kuwait Based Company) from October 6, 2006 to till date as a Senior Accountant

Job Profile:

 Prepare of payment voucher, Journal Voucher, Purchases voucher
 Prepare Monthly Bank Reconciliation
 Prepare Inter unit Reconciliation
 Prepare of Salary Sheet, & Timely distribution of Salary
 Timely payment of petty cash in site office
 Self Correspondence.
 Prepare of Local Purchase Order
 Coordination of Supplier
 Price Enquiry of various Supplier

CHEVRON HOTELS & RESORTS PVT. LTD NAINITAL (CLASSIFIED BY GOVT. OF INDIA DEPARTMENT OF TOURISM AS HERITAGE HOTEL) UTTRAKHAND INDIA

Location: Nainital Uttrakhand, India

Period of Service :- October 2000 to September 2006
Designation :- Account Executive
Reporting to :- Managing Director

Job Profile:

 Prepare of Sales Voucher , Payment Voucher, Journal Voucher, Debit Note, Credit Note,
 Prepare of Salary Sheet, Bank Reconciliation, Inter Unit Reconciliation
 Daily/Night Audit Work of Front office
 Dealing with tax Department
 Dealing with Local authority for License
 Timely payment of Sales Tax, VAT, TDS
 Handling Annual Assessments case with Tax Department
 Correspondence with Banks & Govt.Offices
 Coordination with Auditor
 Knowledge of Front Office Work
 Internal Audit work for Store, Front Office

.
SHERVANI HILLTOP INN (ONLY THREE STAR HOTEL IN NAINITAL) UTTRAKHAND INDIA (A UNIT OF STAR HOTEL LTD. DELHI)

Location: Nainital Uttrakhand, India

Period of Service:- August 1995 to September 2000
Designation :- Accountant
Reporting to :- Company Secretary

Job Profile:

 Prepare of Sales Voucher , Payment Voucher, Journal Voucher, Debit Note, Credit Note
 Prepare of Salary Sheet, Bank Reconciliation, Inter Unit Reconciliation
 Daily/ Night Audit Work of Front Office
 Dealing with tax Department
 Dealing with Local Authority for License
 Timely Payment of Sales Tax, VAT, TDS
 Correspondence with Banks & other Institutions.
 Coordination with Auditor
 Prepare Monthly Trial Balance & Profit & Loss Account
 Handling Annual Assessments case with Tax Department
 Knowledge of Reception & Store Work
 Daily food Costing
 Internal Audit work for Store, Front Office

Personal Information

Father Name:- Mr. Sirajuddain

Mother name:- Mrs. Ajeevan Begum

Date of Birth:- 12th Nov. 1967

Nationality:- Indian

Religion:- Islam

Marital Status:- Married

Height:- 5”3’

Language Known:- Hindi, English, and Urdu

Passport Detail:-

Passport No:- B0109579
Date of issue:- 02-06-1999
Date of Expiry:- 02-06-2009
Place of issued:- Bareilly

U.A.E Visa Status:- Employment (Transferable)
Validity:- Upto 1st July 2011

( Khalik )
.

khalik August 18th, 2008 at 7:03 am

I am a Post Gradute in Commerce, presently having more than 14 yrs, of Experience and presently working with A International Construction Company (ACICO Construction Co.) based at Dubai U.A.E, looking for a opportunity to work with TATA MOTORS in Uttarakhand .

balaji August 18th, 2008 at 5:21 pm

I had completed my B.TECH MECHANICAL ENGINEERING in 2008 ,fresher and i secuured 67%(first class). And I had also completed DIPLOMA ARCHITECTURE ENGINEERING (62%),first class. And i had completed courses of AUTOCAD, PRO-E. my b.tech project is DESIGN AND MODELING OF LATHE TAILSTOCK on aided of PRO-E.

shishir bharti August 21st, 2008 at 1:52 am

Respected sir/madam

I Shishir Bharti is a mechanical engineering final year student from Babu Banarasi Das National Institut Of Technology & Management & going to pass out in june 2007 .I m looking for a preplacement in your company as i want to make career with yor company .please inform me if there any vacancy is available by mail or simply by calling me on 9935859546
hope for your reply
thanks
Yours truly
Shishir Bharti

shishir August 21st, 2008 at 1:55 am

Respected sir/madam

I Shishir Bharti is a mechanical engineering final year student from Babu Banarasi Das National Institut Of Technology & Management & going to pass out in june 2007 .I m looking for a preplacement in your company as i want to make career with yor company .please inform me if there any vacancy is available by mail or simply by calling me on 9935859546
hope for your reply
thanks
Yours truly
Shishir Bharti

Mangalesh n Teggi August 22nd, 2008 at 7:03 am

Hello sir/madam,
I am 2007 passing out engineer in electrical & electronics engg & i really want to work with ur company,and my total experince in production line..
so please reply, if any vaccancy for me
Thanking you……
mail me at: Mangalesh52@gmail.com
mob no:9880626473

tata motors ltd dharwad:i wanted to work in this company

harshal fuse August 24th, 2008 at 11:18 am

i m BE mechanical fresher with degree of 74%.&agregate of 69% ,with backlogs throught BE.need job

shashi roshan August 28th, 2008 at 12:15 am

CURRICULUM VITAE

SHASHI ROSHAN

E-Mail: shashiraushan_hum@yahoo.com
Mobile no: 09901882575
Date of Birth: Mar 1, 1984
Address:
C/o Ram Chandra Singh, ashok raj path
Nobin kothi, patna-800004 (Bihar)

Objective
My skills and thinking capability to the fullest & provides with learning opportunities. To be efficient and effective in whatever endeavors, I undertake and prove myself worth. To pursue a challenging, dynamic, & rewarding career is what I aim to achieve.

Languages known:
English, Hindi

Strengths:
Good Communication Skills, Good Analytical and Logical ability, Confidence, Sincerity and Dedication. Team Player and Task Oriented.

Hobbies:

Singing.
Cooking.
Story & Poem Writing.
Reading.

Extra Achievement:

Organized many function in
In the high school.

N C C A Certificate.

Consistently in Top Five
Position in Class 10.
Educational Qualification

• XIIth from B. N. COLLEGE, Patna under BIEC with 60.8% marks.
• Xth from B. N. COLLEGIATE, Patna under BSEB with 82.5% marks.
• B.E. in Mechanical from M V J COLLEGE of Engineering, Bangalore (2004-08) under VTU with 69 % marks.

Branch/Specialization

Mechanical

Technical Skills & S/W Exposure
Languages : Basics of C.
Mechanical : Auto CAD, Mechanical Desktop.
CATIA V5.
Pro/E.

Academic Record at B.E Level

Overall 6 9% in B.E
Year 1st Sem 2nd Sem
B.E. 1 Year 70.5 68.7
B.E. 2 Year 60.2 66.2
B.E. 3 Year 62.5 64.6
B.E 4 Year 65.5 83.04

Declaration

I hereby declare that above mentioned particulars are true and correct to the best of my knowledge.
Location: Bangalore
[SHASHI ROSHAN]

S.MANIMARAN August 28th, 2008 at 8:43 am

I have completed my diploma in TOOL & DIE ENG in coimbatore with 1 year experience pass out in july 2007 and with 1 year experience of assembling of presstools,jigs& fixtures.I m looking for a preplacement in your company as i want to make career with yor company .please inform me if there any vacancy is available by mail or simply by calling me on 9962703980
kindly for your reply sir
thanks
Yours truly
manimaran

dhawal alexander August 29th, 2008 at 10:30 am

CURRICULUM VITAE

DHAWAL ALEXANDER
Permanent Address: S/O Mr. A. J. ALEXANDER
A-1086, INDIRA NAGAR,LUCKNOW
PIN- 226016,(U.P.)
Mob No.: +919235070525
Email: dhawal_alexander@indiatimes.com

OBJECTIVE

To get an opportunity in growing and dynamic organization, where my technical and communication skills would be utilized as well as enhance the growth of the organization and an individual as whole.

PROFESSIONAL QUALIFICATION

B.Tech (Mechanical.)

Institution : Allahabad Agricultural Institute-Deemed University, Alld.
Year of passing : 2008
Result : 70.05%

ACADEMIC QUALIFICATION

10th Class from ICSE Board
Institution : St. Dominic Savio,Lucknow
Year of passing : 2002
Result : 68%
10+2 Science with Intermediate Board
Institution : Dabble College, Lucknow
Year of passing : 2004
Result : 58%

COMPUTER PROFICIENCY

• knowledge of C
• AUTOCAD

ADDITIONAL DETAILS:

• One month summer training in “HINDUSTAN AERONAUTICS LTD.” LUCKNOW

EXTRA CURRICULAR ACTIVITIES

• Have been a member of NCC. AIR WING and have recived gold medal in aero modeling.

Working Project
“CAD OF HYDRO ELECTRIC PROJECT”

PERSONAL PROFILE

Father’s Name : Mr. A. J. Alexander
Date of Birth : 24 april 1987
Sex : Male
Marital Status : Single
Nationality : Indian
Language known : English & Hindi
Hobbies : Netsurfing, Computer related works

REFERENCE:

• Dr. R.Yadav
Dean of CET
Department of Mechanical Engineering
Allahabad Agricultural Institute- Deemed University, Allahabad, (U.P.)

Declaration
I hereby declare that all the above mentioned information is true to the best of my knowledge and belief.

Date:
Place: Dhawal Alexander

Shilpi Singh September 2nd, 2008 at 9:08 pm

Want a job

Kuldeep Kumar September 5th, 2008 at 2:29 am

I am Sr. Executive Q.A in Automotive Ind. Poly Plastics Yamuna Nagar( Haryana).
I have Specilization Inj. Moulding, Plastics Part Painting,Powder Coating,and Knowledge of APQP, FMEA,SPC,ISO/TS:16949,ISO:14001,1SO270001 and Internal auditor,Yellow Belt certified in SIx Sigma, and work on Green Belt Project TATA 14″ WRC Process optimization.

Kuldeep Kumar September 5th, 2008 at 2:32 am

Wants a job in TATA Motor at Rudarpur

I am Sr. Executive Q.A in Automotive Ind. Poly Plastics Yamuna Nagar( Haryana).
I have Specilization Inj. Moulding, Plastics Part Painting,Powder Coating,and Knowledge of APQP, FMEA,SPC,ISO/TS:16949,ISO:14001,1SO270001 and Internal auditor,Yellow Belt certified in SIx Sigma, and work on Green Belt Project TATA 14″ WRC Process optimization.

GAUTAM PATHAK September 5th, 2008 at 6:02 am

I AM AN AUTOMOBILE ENGINEER. I WAS COMPLETED MY DIPLOMA IN AUTOMOBILE LAST 2004. AFTER THEN WORKING WITH -1 YEAR DELEAR OF EICHER MOTORS & TILL SERVECING IN LEXUS MOTOR DELEAR OF TATA MOTORS AS SERVICE ADVICER.

B. B. Mishra September 8th, 2008 at 1:31 am

CURRICULLAM VITAE
C/o Biswanath Ghosh,
B-1 Jay Jayanti sarani,Sector 2-C,
Bidhannagar, Durgapur (W.B.)-713212
Ph. No (M) 097320 12627,(H) 9734719334
BIDYA BHUSHAN MISHRA e-mail : bidyabhushan511979@rediffmail.com

OBJECTIVE

To pursue a challenging career with a vibrant organization that encourages continuously with fresh ideas and opportunities of personal growth.

PERSONAL DETAILS

• Father’s Name : Mr. Pursotam Mishra
• Date of Birth : 5th January 1979
• Nationality : Indian
• Martial Status : Married
• Linguistics Known : English, Hindi, Bengali
• Hobbies : Listening Music, Sports, Reading Books
• Phone No. : (M) 09732012627

ACADEMIC QUALIFICATION

• Passed Secondary Exam (Bokaro High School), year 1993.
• Passed Higher Secondary, with science (Bokaro College, Bokaro), Year 1995.
• Passed B.Com (Hons.)(Bokaro College, Hazaribag University), Year 1999.

PROFESSIONAL STUDIES

Chartered Accountancy Examination PE-II.

COMPUTER SKILLS

Excellent knowledge of M.S.-Office/Windows, Accounting Packages. Knowledge’s of other software like e-TDS, ERP System.

EMPLOYMENT & RESPONSIBILITIES

1) Organization : M/s Rajesh Duggar & Co., Chartered Accountants firm at Kolkata.

Position : Senior Position (Accounts & Taxation)

Period : From 1999 to 2003.

Job Profile : Conducted statutory as well as internal audit of various listed & unlisted concern having huge turnover. Experience in ‘Tax Audit’.

: Responsibilities held to Finalization of Accounts as well as statutory compliances such as Income Tax, Service tax & Professional tax (including all type of hearing at each label independently). Exposure of all kind of related procedure like: assessment, drafting, e-TDS matter & Maintenance of books of A/c accordingly.

2) Organisation : M/s. Parasnath Vyapaar & Manufacturers Pvt. Ltd, at KOLKATA and its Branches at (Group of Companies) the manufacturer of umbrella & its parts at Kolkata in the brand name “CITIZEN”.

Position : Senior Officer (Accts. & Taxation).

Period : From 2003 to 2004.

Job Profile : Responsibilities held in the Accounting & Taxation matters, where related all types of accounting as well as statutory compliances.

3) Organization : M/s. Maa Shakambari Steel Ltd. at RAIGARH having Group turnover above Rs.150 corers and company engaged in the manufacturing of Sponge Iron along with Captive Power Plant.

Position : Asstt. Manager (Accts. & Excise)

Period : From 2004 to 2006.

Job Profile : Where responsible for day to day controlling of Accounting entry, Stores entry & Statutory compliances.

Accounting : Controlling over all manufacturing accounting, Capitalization of expenses, Project accounting, CENVAT accounting, accounting of Service-tax & VAT credit, accounting of all statutory liabilities. Reconciliation of Bank as well as Customer and Supplier accounts, Accounting with considering all the provisions, guideline and also as per Accounting Standard. Capable to finalization of A/c independently.

In VAT/CST & e-TDS : Controlling of all required activities i.e. deposit Monthly tax & Quarterly Return, to collect, issue and deposits the Statutory Forms. Maintenance of books and register accordingly.

In Central Excise : Responsible for maintenance of Stock Register, RG & PLA Register, depositing excise duty & submitting ER return within due time. Meets statutory requirement, correspondences, compliances & documentation according to C.E. Audit.

MIS Reporting : Includes monthly P& L A/c., Daily Stock positions (R.M. & F.G.), Cash flow, analysis of Cost of production, Fund flow as per Disbursement of Term Loan Preparation of Stock & Book Debts statement for Cash-Credit purpose, other related Report like FFR.

: Reporting: To Director & GM of the company.

4) Organization : M/s. Surya Alloys Industries Limited (ISO :9001 & RDSO certified Co.) under Rungta Group at BARJORA (DGP) one of the largest integrated steel plant in the West Bengal having expansion projects. The company is pioneers in making of Alloy Steel, Spring Steel, Stainless Steel and Railway Materials with installed capacity of two nos. of Rolling Mill (Structural & Round Mill) Induction Furnace, Steel Melting Shop (CCM with Electric ARC Furnace,LRF,VD, & VOD) & E.R.C. Division (ERC, Fish Plate, Bearing Plate & Other Rly. material).

Position : Manager (Accts. & Excise)

Period : From 2006 & Continue now.

Job Profile : With capacity of Authorized Signatory under Central Excise where responsible for controlling and accountability of day-to-day commercial activity at factory label which includes Daily Stock, Central Excise, Export & Import, Service Tax, MIS, Costing, Budgeting, Day-to-day Liaisoning with H.O., Auditors, Consultants & Others Govt./Statutory Bodies. Responsibilities held to maintain all the records of Central Excise & Service-Tax and Filing of Return accordingly.

: Achievement: Have got achievement in the sense of system implement during my employment like commercial activities converted from full manual to computerized environment viz. as Accounts & Excise, Store, Weighment Bridge, Main Gate, And Personnel dptt. Best system implemented to synchronize among Main Gate, Store & Excise Records.

: Reporting: Direct reporting to M.D., C.E.O. & G.M. of the company.

Over all 9 years+ working experience & controlling of Accounting function in order to ensure that the performance of the division is in line with the Corporate Goal, which includes Liasioning, Planning, Costing, Budgeting, Accountability, Statutory matter and MIS Reporting.

ATTITUDE

 Positive and Creative.
 Working of analytical manner.
 Strong Documentation.

Salary Drawn : Rs. 3.25 Lakh (CTC),

Notice Period : One Month

Salary Expected : Negotiable.

Location Preferred : Any Where

PLACE : BARJORA, W.B. ( Bidya Bhushan Mishra )

DATE :

Manoj Kumar Satyawali September 8th, 2008 at 4:46 pm

Hi sir!
This is Manoj from Bangalore. Now i am working in MNC. i have completed diploma in Electrical engineering from Ahemadabad. i have total 8year experence & i has been worked in Maruti udyog ltd also, Tata company is continue growth so want to see your technology please give me apportinuty for same.
Best Regards,
Manoj satyawali
Bangalore
91-9743524880

hariprasad September 10th, 2008 at 4:11 am

Now iam studying final year mechanical engineering. i want to get place in your company. if you recruite 2009 passed out students ,please give me intimation.

shishir biswas September 11th, 2008 at 7:38 am

Well i wanted to work in your organization. I am a Diploma Holder from NTTF Sikkim from DTDM. Ma contact address is 09234280934/09006771716 e-mail: shishir-iw_iway@sify.com

shishir biswas September 11th, 2008 at 7:39 am

Well i wanted to work in your organization. I am a Diploma Holder from NTTF Sikkim from DTDM. Ma contact address is 09234280934/09006771716 e-mail: shishir_iw_iway@sify.com

R.SELVARAJ September 13th, 2008 at 5:47 pm

I am a Fresh Mechanical Graduate(2008 Passed out) with 70%, from chennai willing to prove myself as an efficient Person in your reputed Organisation. My mobile nymber is 919884793814. Kindly consider my AD

alok ranjan singh September 16th, 2008 at 12:11 am

I am fresh mechanical graduate pass in 2008 with 64%, from UP Techanical University Lucknow (Maharana Pratap Engineering College Kanpur). Please give me one chance to prove myself in your glorifying Organisation.
Email- ars_8689_rediffmail.com , Phone No- 011-32527468

SHANTANU P. TIJARE September 19th, 2008 at 5:22 am

RESUME

SHANTANU P. TIJARE

Personal Details:-

Name: - SHANTANU PRADEEP TIJARE

Present Address: – B-506,Mont Vert Grande, Sutarwadi link road, near Sai
Chowk, Pashan, Pune.

Contact no: – 9975640417
Date of birth: – 25 Oct, 1986.
Gender: – Male
Marital Status: – Single.
Languages Known: – Marathi, Hindi, English, German.
Career Objective:-

Securing a dynamic position in a company that utilizes my technical skills and allows professional growth.

Educational Qualification:-
Pre-Engineering Qualification

Class School/College Year Percentage Marks
S.S.C Somalwar High school, Nagpur. 2002 85.06
H.S.C. Dinanath Jr College, Nagpur 2004 81.33
Mechanical Engineering Qualification

Class College University Year Of Passing Percentage Marks
8th sem YESHWANTRAO CHAVAN COLLEGE OF ENGINEERING. RASHTRASANTTUKADOJI MAHARAJ NAGPUR UNIVERSITY 2008 70.5
7th sem 2007 64
6th sem 2007 70.8
5th sem 2006 65
4th sem 2006 66
3rd sem 2005 62.88
1st year 2004 60.88
Engineering Average:- 65.50%

Technical Skills:-

Operating System: Windows 98/XP.
Languages known: Basic knowledge of C.

Projects Undertaken:-

§ A Project Done:
Ø Title:- Design and Fabrication of an Ornithopter
Ø Overview: -An ornithopter is a device, which flies by flapping. In this project a model of mechanized bird is designed, manufactured and tested by using motors of different RPM.
■ A Mini Project Done:
.Title:- Vane anemometer
Ø Overview: -A project on ‘Vane Anemometer’ which determines the velocity of
air mechanically.

§ Seminar on Technical Trends in Fuel Injection System:-
Ø Overview: – A seminar was presented on ‘Technical Trends in Fuel Injection
System’. The working, components, advantages of F.I. system are
discussed.

§ Industrial Training:-Undergone an industrial training in ‘Alpha Remedies’ for 7
days.
■ Industrial Case Study: – A case study on Electrostatic Precipitator is done in ‘Koradi
Thermal Power Station’
Extra Curricular Activities:-

§ Stood 2nd in a MIMICRY competition
§ Organized a quiz competition in YCCE_FEST.
§ Motivator in BLOOD-DONATION CAMP.
§ Participated in MIND-SKILL workshop.

Co Curricular Activities:-

· Participated in a national level AERODROME work-shop
· Presented a paper on ‘Advanced Materials with Application’ in national level competition ICON_2K6.

Strengths:-
Honesty, Live with acceptance and friendship, hard work.

Hobbies and Interest:-
§ Listening and singing Indian Filmy music.
§ Interested in Cars.
§ Mythology.
Declaration:-
The above information is true to the best of my knowledge and belief.
TIJARE SHANTANU P.
Place: Nagpur
Date:

RABI SHANKAR DAS September 19th, 2008 at 7:50 am

Respected Sir,
I am fresh mechanical Diploma Engineer pass in 2008 with 82.2%, from Ramakrishna Mission Shilpamandira,BelurMath.Please give me one chance to prove myself in your glorifying Organisation,and give me some opportunity to show my knowledge & skills which will be applicable to your company.I am looking for your favourable response.

Thanks & Regards

RABI SHANKAR DAS September 19th, 2008 at 7:52 am

Respected Sir,
I am fresh mechanical Diploma Engineer pass in 2008 with 82.2%, from Ramakrishna Mission Shilpamandira,BelurMath.Please give me one chance to prove myself in your glorifying Organisation,and give me some opportunity to show my knowledge & skills which will be applicable to your company.I am looking for your favourable response.
My e-mail address is:- das.rabishankar@yahoo.com
Thanks & Regards

rakesh September 19th, 2008 at 10:34 am

hi im rakesh fresh BE mechanical engineer, completing BE with an agg. of 63.22%, at present im working in MNC bangalore, in the field of production. this is one of my dream company plese give me a chance to work in indias greatest company. n im waiting for u r responce in my e-mail rakesh.n.ng@gmail.com,,
thank u.

pavan.m September 21st, 2008 at 7:38 pm

CURRICULUM VITAE

PAVAN.M
room no:03
GuruKrupa cottage,
620,W,Mangalwarpeath,
Balevas, near telephone Bavan,
Solapur

Email id:
pavan00m@rediffmail.com
Contact No.099706137878 (mob)

OBJECTIVE: To join a progressive organization that would provide me with the opportunity towards the growth of the organization besides realizing my personal goals.

EDUCATIONAL PROFILE

Qualification
Institute/University
Major subjects
Year of study
% Of Marks

SSLC
Priyadarshini English medium high school, Holenarasipur,Hassandist
Maths,Science
2003-2004
63.20%

T.D.M
NTTF Technical Training Centre, Dharwad.
Tool Design & Theory, Mould Design & Theory
2005-2007
70.79%

APPLICATION SOFTWARE

• PRO-E (wild Fire-3),
• Uni-graphics (NX-4),
• AutoCAD (2002, 2004, 2006, 2007).

EXPERIENCE DETAILS

IMPLANT TRAINING UNDERGONE AT NTTF IL, BANGALORE.
From NOVEMBER 1st TO 15th 2006.
• Exposure in shop floor activities such EDM, CNC and other activities.
• Maintenance of injection mold for various complicated plastic parts.

INDUSTRIAL TRAINING UNDERGOING AT MECTRON ENGINEERING , B’LORE.

• Exposure on auto cad 2006.
• Exposure in shop floor activities such Profile grinding, CNC Wire cutting m/c and other activities.
• Maintenance of Compound tools for various complicated sheet metal parts.

ACADEMIC PROJECT

Title: Design, Analysis and Manufacturing of Compound tools for precision components such as generator’s of inner parts Precision watch hand components, measuring instruments dial indicator needles.

Organization: M/s. MECTRON ENGINEERING, B’LORE.

EXPERIENCE IN
SCHMIDT-BRETTEN(INDIA)PVT.LTD,SOLAPUR
• Exposure on Uni-graphics (NX-3),
• Maintenance of Forming tools
.
Description: The component for the project is an precision component used in precision dial indicators. The objective was to design a Progressive tool. The manufacturing part and the tool tryout were also monitored.

EXTRA CURRICULAR ACTIVITY
Coin collecting, Collecting Photographs, Karate.

PERSONALSKILLS
Innovative, comprehensive problem solving ability, team facilitator, willingness to learn.

PERSONAL DETAILS

NAME : Mr Pavan.M

DATE OF BIRTH : 30 sep 1989

AGE : 19 Yrs

FATHER’S NAME : Mr Manju.H.C

GENDE : Male

NATIONALITY : Indian

MARTIAL STATUS : Unmarried

LANGUAGES KNOWN : Kannada , English, Hindi.

HOBBIES : Coin collecting, Collecting Photographs, Cricket, Karate.

I hereby declare that the above particulars are correct according to my best knowledge.

Place: Solapur (Pavan.M)
Date: 01/05/08

Permanent Address
Mr : Pavan.M
C/O Mr: Manju.H.C.
Mala Photo Studio, Main Road
Holenarasipur,
Hassan dist
Karnataka

CURRICULUM VITAE

PAVAN.M
room no:03
GuruKrupa cottage,
620,W,Mangalwarpeath,
Balevas, near telephone Bavan,
Solapur

Email id:
pavan00m@rediffmail.com
Contact No.099706137878 (mob)

OBJECTIVE: To join a progressive organization that would provide me with the opportunity towards the growth of the organization besides realizing my personal goals.

EDUCATIONAL PROFILE

Qualification
Institute/University
Major subjects
Year of study
% Of Marks

SSLC
Priyadarshini English medium high school, Holenarasipur,Hassandist
Maths,Science
2003-2004
63.20%

T.D.M
NTTF Technical Training Centre, Dharwad.
Tool Design & Theory, Mould Design & Theory
2005-2007
70.79%

APPLICATION SOFTWARE

• PRO-E (wild Fire-3),
• Uni-graphics (NX-4),
• AutoCAD (2002, 2004, 2006, 2007).

EXPERIENCE DETAILS

IMPLANT TRAINING UNDERGONE AT NTTF IL, BANGALORE.
From NOVEMBER 1st TO 15th 2006.
• Exposure in shop floor activities such EDM, CNC and other activities.
• Maintenance of injection mold for various complicated plastic parts.

INDUSTRIAL TRAINING UNDERGOING AT MECTRON ENGINEERING , B’LORE.

• Exposure on auto cad 2006.
• Exposure in shop floor activities such Profile grinding, CNC Wire cutting m/c and other activities.
• Maintenance of Compound tools for various complicated sheet metal parts.

ACADEMIC PROJECT

Title: Design, Analysis and Manufacturing of Compound tools for precision components such as generator’s of inner parts Precision watch hand components, measuring instruments dial indicator needles.

Organization: M/s. MECTRON ENGINEERING, B’LORE.

EXPERIENCE IN
SCHMIDT-BRETTEN(INDIA)PVT.LTD,SOLAPUR
• Exposure on Uni-graphics (NX-3),
• Maintenance of Forming tools
.
Description: The component for the project is an precision component used in precision dial indicators. The objective was to design a Progressive tool. The manufacturing part and the tool tryout were also monitored.

EXTRA CURRICULAR ACTIVITY
Coin collecting, Collecting Photographs, Karate.

PERSONALSKILLS
Innovative, comprehensive problem solving ability, team facilitator, willingness to learn.

PERSONAL DETAILS

NAME : Mr Pavan.M

DATE OF BIRTH : 30 sep 1989

AGE : 19 Yrs

FATHER’S NAME : Mr Manju.H.C

GENDE : Male

NATIONALITY : Indian

MARTIAL STATUS : Unmarried

LANGUAGES KNOWN : Kannada , English, Hindi.

HOBBIES : Coin collecting, Collecting Photographs, Cricket, Karate.

I hereby declare that the above particulars are correct according to my best knowledge.

Place: Solapur (Pavan.M)
Date: 01/05/08

Permanent Address
Mr : Pavan.M
C/O Mr: Manju.H.C.
Mala Photo Studio, Main Road
Holenarasipur,
Hassan dist
Karnataka

praveen deshpande September 24th, 2008 at 2:05 pm

Hello sir,
Myself Praveen Deshpande have completed the BE(I&PE)…
If u have any vacancy please contact me at 09902345747…
thank you….

with regards,
praveen

VIJAY SINGH BASERA September 25th, 2008 at 12:28 pm

sir
i m a fresher , persuaded B.Tech in Mechanical engg. with aggregate 73%. looking for a job in automobile sector in uttrakhand.

Regard
VIJAY SINGH BASERA

DINESH KUMAR.P October 14th, 2008 at 4:32 pm

am finished TOOL AND DIE MAKING if any vacancy pls contact me……………09944360430/9443965214

Dr Snow White November 3rd, 2008 at 3:15 pm

FINANCE GLOBAL INVESTMENT

I am Dr Snow White, a Private Loan Lender and a cooperate financial for real estate and any kinds of business financing. I also offer Loans to individuals, Firms and cooperate bodies at low interest rate , loan terms determinant,Loan amount between the sum of $5,000.00 (Five Thousand Dollars)to $1,000,000.00 (One Million) US Dollars. Loan for developing businesses a competitive edge/ business expansion.

We Offer The Following Kinds Of Loans
* Personal Loans (Secure and Unsecured)
* Business Loans (Secure and Unsecured)
* Consolidation Loan
-Low Down or Zero Money Financing Program Available

FIRST INFORMATIONS NEEDED ARE:
Full Name:
Location:
Age:
Sex:
Contact Phone numbers:
Amount Needed:
Duration:
monthly Income:
Occupation:
Contact:+2348065436995
E-mail: financial_011@hotmail.com

THERE IS NOTHING TO LOSE BUT YOUR DEBT AND FINANCIAL PROBLEMS !!!
Here to show you a better way to financial freedom !!!

Dr Snow White November 3rd, 2008 at 3:29 pm

FINANCE GLOBAL INVESTMENT

I am Dr Snow White, a Private Loan Lender and a cooperate financial for real estate and any kinds of business financing. E-mail: financial_011@hotmail.com

vijaykokne November 18th, 2008 at 5:52 pm

i am mechanichal engineer.now service running by defence but now i will do job in the Tata Motors company.

RAM SINGH MEHRA December 10th, 2008 at 7:28 pm

13
sir i am ram singh mehra along with diploma in g .paintear trade iti from in dehradun 2 years looking for a job in tata motor ltd rudrapur

Ma contact address is e-mail: ramsinghmehra@rediffmail.com
mb-no-9917532504
ram singh mehra
cmc limitede
HO-8lane no 3
street-no-3b
vasnit vihar Enclave dehradun UK 248001

Virendra Navlakhe December 26th, 2008 at 10:37 am

Dear Sir,

I want to apply for job as a trainee engineer in your company.I have sent you my updated resume.Please go through it for further preferences.

RESUME

VIRENDRA NAVLAKHE Address:
E- Mail : virunavlakhe@gmail.com Room no.10, shitchaya Hou.society, Mobile : 09764132760 Sector no.26, pradhikaran,
: 09921794744 NIGDI, PUNE-44.

OBJECTIVE:

To work in a globally competitive environment using cutting edge of technologies, where I could constantly learn and successfully deliver my technical and analytical abilities.

ACADEMIC PROFILE:

B.E. [Mechanical] in year 2008 secure 71% with Distinction.
Electives taken (Automobile & Non-Conventional sources of Energy) from
J.T.Mahajan College of Engineering, Faizpur.
(Affiliated by North Maharashtra University, JALGAON).

Intermediate
(Physics, Chemistry, Maths) in year 2002 secure 61% from
M.P Board, BHOPAL.

S.S.C in year 2000 secure 61% from
M.P Board, BHOPAL.

ADDITIONAL QUALIFICATION:

· Certificate Course in CATIA V5 R14 (Sketcher, Part Design, Solid Modeling, Surfacing, Assembly & Drafting) in January 2008 from
“ANTECH TECHNOLOGY PVT. LTD.” PUNE.

TRAINING PROFILE:

Ø Industrial training for three months that is from 1st August to 31st October 2008 at “VIJAY ENGINEERING WORKS” MIDC,CHINCHWAD,PUNE.
Work Profile:-
· To convert 2D Drawings into 3D Modeling of Hydraulic Control Block, Bearing Spacers, Angle Ring, Steering Knuckle etc. by using CATIA V5.
· To check the Quality of finished products by using different Measuring Instruments.

Ø Underwent training for one month that is from 1st January to 1st February 2007 at
“SAHAZ FABRICATION AND TECHNOCRAFT PVT.LTD” PUNE.

Ø One week training in HUMAN RESOURCES DEVELOPMENT in year 2007 from “DYANPEETH ACADEMY” PUNE.
PROJECT DETAILS:

PROJECT: “DESIGN AND FABRICATION OF IMPROVED MECHANICAL POWER AMPLIFIER MECHANISM”.

OBJECTIVE: Precise positioning and movement of heavy loads are two basic jobs of this all-mechanical torque booster.

SEMINAR: “EFFECT OF DISC BRAKE AND DRUM BRAKE ON THE DURABILITY OF FRONT SHOCK ABSORBER TUBE OF A MOTORCYCLE”.

The seminar is based on to study this effect, several test where conducted on a motorcycle fitted with disc and drum brakes to investigate whether high bending stress on inner shock absorber tube leads to any premature failure.

PERSONAL DETAILS :

Name : Virendra Navlakhe
Age : 25 years
DOB : 15-09-1983
Sex : Male.
Marital Status : Single
Nationality : Indian
Permanent Address : S/O Shri Omprakash Navlakhe
L.B-57, new indira colony
Burhanpur (M.P) PIN-450331
Languages Known : English, Hindi, Gujarati and Marathi

Declaration
I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Date:

Place: PUNE Virendra Navlakhe

Largest And Highest Converting Template Dealer. | 7Wins.eu February 27th, 2009 at 1:45 pm

[...] The UFO Enigma: Spirits of the Dead, Phantom Airships and Flying Discs « Vincent BridgesMarketiva Forex Broker « Make Money onlineTata Motor’s Independent production hubs | NiTS' Autos [...]

Jaskirat Singh April 5th, 2009 at 10:23 am

I am auto mobile engineer. I complete my diploma in last year. I am fresher. i want a job in any auto mobile passanger vehicle manufacturing company like as a(tata motor. maruti, hyundaietc)

M: 9878979782
9463345365

Afrozali April 26th, 2009 at 2:22 pm

Hi iam a diploma holder in automobile having 18 months of experience. iam looking for a tata job in dharwad as iam from dharwad.

Mohan Patte May 9th, 2009 at 4:04 pm

Resp. Sir,

I am Mechanical engg
I have attched my CV with mail
please go trought it.
I have 1 yr. exp. in design field.
I have knowlege in Pro-e,Solide Edge,
unigraphics NX-4 & Catia AUTO-CAD 07
I done three live project on cad software
If my crateria will sufficint for your organisation,

Please call me.

My Contact no. 09822695169

Thanks with regards
Mohan patte

soniya rani May 18th, 2009 at 11:37 am

Soniya Rani
d/o Shri Ravidutt
H.NO. 307 New Chock Mohalla
Back Side of Ashoka Academy
kanker khera Meerut cantt
India 250001
Telephone No. Res. (0121) 2557552
Mobile Phone No. +9368733130
Email Address: soniya_rani26@yahoo.com

OBJECTIVE:

To further enhance my professional ability, knowledge and skills through working in a more challenging organisation.

WORK EXPERIENCE:

Industrial Engineer,kitting(motherboard assemble),electrical maintenance
4 May08– 3May09
HCL INFOSYSTEMS Ltd.
Uttrakhand, India

JOB DESRIPTIONT :-

I have worked in IE Dept, maintenance deptt
Knowledge of Kitting, DD, Assembly, FQC & Repair Department.
Knowledge of all consumption and generation power in HCL INFOSYSTEMS LTD.
ü Planning of resource management for the company.
ü Checking all maintenance document & all handover check sheet.
ü Prepare P.O & payment reguest, all official works.
ü Maintain the list of assets of the company.
ü Control expenses with receipts to sanction billing amount.
ü Process the bill.
ü Handle internal customers as well as vendors in Productivity Increment Cell, üTime Study, Motion Study and Line Balancing
.

EDUCATIONAL BACKGROUND:

2005 – 2008 GOVT POLYTECHNICAL BAREILLY
Diploma in Electrical Engineering
Percentage Marks : 75%

2003 – 2005 DURGA BARI A.B GRILS INTER COLLAGE
10+2 PCM (Intermediate, U. P.Board)
Percentage Marks : 58.8%

2002 – 2003 GURU NANAK GIRLS INTER COLLAGE
10th (High School, U.P. Board)
Percentage Marks : 57%

ACADEMIC ACHIEVEMENTS:

ü NCC certified and attended camp

EXTRA-CURRICULAR ACTIVITIES:

ü Won prizes at college and school level
ü Won prizes at TECHINICAL INSTITUE (HIGH Jump, long Jump,200mtr.,400mtr.800mtr.race)
COMPUTER SKILLS:

Excellent knowledge in computer operation and application such as MS–Office and internet operation. Operating systems knowledge includes Windows 9x/XP, DOS.

MAJOR TRAINING PROJECT:

Study of asembled Process of Turbo GEN ,Hydro GEN,Armature, EXcitor in BHEL HARIDWAR

MAJOR COLLAGE PROJECT

EXTIMATING & Costing of ELECTICAL LAB
MAKE MODEL TRAFFIC LIGHT CONTROLLERS

PERSONAL INFORMATION:

NAME : Soniya Rani
SEX : Female
CIVIL STATUS : Single
CITIZENSHIP : Indian
BIRTH DATE : Jan 26, 1988
Father’s Name : Shri Ravidutt
Languages Known: English, Hindi,Punjabi
Hobbies : drawing, listening to soft
Music, writting poem

TRAININGS/SEMINARS ATTENDED

üISO(EMS/QMS)

üESD

ü5s, KAIZAN
Human Resource Management
Global Warming

(References available upon request)

Place:
Date: (soniya rani)

Ramesh.M May 28th, 2009 at 3:26 pm

I am a Mech engineering final year student expecting result.I studied in College of Engineering, Adoor,under Cochin University.

Naveen singh June 22nd, 2009 at 11:30 am

Hai,i am naveen and you

mohd danish June 30th, 2009 at 5:00 pm

sir i m find job in tata motor s
mobile _9634065483

mohd danish June 30th, 2009 at 5:03 pm

sir i done harware&networking diploma iiht moradabad
mob_9634065483

DALAL PAVAN July 10th, 2009 at 3:17 pm

sir i m find job in tata motor s
mobile _09427533357

DALAL PAVAN July 10th, 2009 at 3:18 pm

I am auto mobile engineer. I complete my diploma in last year. I am fresher. i want a job in any auto mobile passanger vehicle manufacturing company like as a(tata motor. maruti, hyundaietc)

M: 09427533357

Leave a Reply